is a flat grid of three rods welded perpendicularly to each other with double horizontal rods, between which vertical rods are welded. This design gives the panels rigidity and resistance to shock loads.
Sectional 2D fences are often used for fences with increased strength requirements (stadiums, sports and children’s playgrounds, animal enclosures, etc.)
6 х 5 х 6 мм.
4 х 5 х 4 мм.
50 х 200 мм.
2,5 м. або 3 м.
1000 мм.,
1200 мм.,
1500 мм.,
1700 мм.,
2000 мм.
is a three-dimensional mesh, due to curved “V” similar stiffeners.
This type of fence is a mesh structure made of galvanized rods welded perpendicularly to each other. Due to the stiffeners, this design does not allow the section to sag and deform under the influence of external factors.
The scope of application of such sectional fences is very wide: private areas, commercial areas, parks and squares, and much more.
5 х 5 мм.
4 х 4 мм.
4 х 3 мм.
50 х 200 мм.
2,5 м. або 3 м.
1000 мм.,
1200 мм.,
1500 мм.,
1700 мм.,
2000 мм.
Mesh fences are rectangular structures made of round pipes and mesh fabric. This design is light and at the same time rigid thanks to the frame made of pipes. To install a temporary fence, portable concrete blocks with holes are used. In this block, two adjacent sections are installed vertically, and with the help of fixing plates on the bolted connection, the sections are connected to each other at the top.
In this way, a continuous mesh fence of the required length and configuration is created. If necessary, a wheel can be installed at one end of the section, thereby forming a sliding gate for access to the fenced area. Thanks to the lightness of the design and the ability to quickly erect and assemble a temporary fence, this type of fence is mobile and can be used multiple times.
When using temporary (mobile) fences, you can save money on erecting fences at construction sites, places of temporary repair work, sports or other mass events. The section of the temporary (mobile) fence can be used to fix advertising or informational banners on the basis of the awning.
3500 х 2000 мм.
3.5 мм.
100 х 300 мм.
27 мм. 40 мм.
